How To Install Linux On Ps3 With Usb

/ Comments off



  • 3SYSLINUX Configuration

Naming convention

Since Syslinux version 3.73, the following naming conventions are adopted:

Plug in a USB keyboard and mouse and insert your Linux CD or USB; it should appear as a Live option at the top of Petitboot. If it doesn't appear, restart your PS3 and go back to Step 4. Your chosen Linux OS will boot up. If using Red Ribbon, select the 'Install Red Ribbon' icon. So if you're on 3.15 or lower all you need is the otheros.bld and a usb drive with ubuntu or whatever on it. But if you're on 3.55 then you'll need to get a usb jig of some sort, I'm not 100% sure if theres a way to install CFW without a usb jig. I'd reccomend going to ps3hax.net to find out more. If you have upgraded your firmware since the removal of the 'Other OS' feature, then there is no official way to install Ubuntu (or any other Linux distribution) on your PS3. There was an unofficial SDK released for the PS3, which would possibly allow you to reinstate the feature, but I'm unsure of any possible legal issues so I won't link to.

The moniker 'The Syslinux Project' (standard proper noun capitalization) shall be used to refer to the project as a whole.

The all-caps form shall be used to refer to a particular loader variant, such as 'SYSLINUX' for the standard disk, or 'ISOLINUX' for 'El Torito no-emulation' bootloader.

The all-lower-case form should be used to refer to a particular installer, such as 'syslinux-mtools' for the mtools-based installer for SYSLINUX, or the 'extlinux' command for EXTLINUX.

'Syslinux' (initial upper-case) refers to 'The Syslinux Project', or to a generic term for the user to replace with one/some/any/every/all bootloader variants of the Syslinux family.

Note: There is still a chance that some official document or some page in the official Syslinux wiki might use inadequate naming / casing. To report typos, or when in doubt, please contact The Syslinux Project.

New users

For newbies to Syslinux, the following links might be helpful as an introduction / learning curve into The Syslinux Project. There is no need to read them all; practical experience and specific interests might suggest what to read / search for.

  • Configuration Directives
  • About Library modules
  • Using Special keys while booting
  • The Simple Menu System

There are many additional wiki pages; use the 'search box'.

Install Linux On Ps3 With Usb

Several Linux distributions also have their own documentation about Syslinux and Syslinux-related packages.


Please add more HowTo's here. We can start with the questions, and later fill up the answers.

SYSLINUX Configuration

How To Install Linux From Usb Drive

  • How to write the config file for {PXE/ISO/EXT}LINUX?
  • How to create the simple menu system?
  • How to create the graphical menu system?

Links

  • Menu Example with sub-menus (not only for PXELINUX)

installing syslinux / how to create a bootable...

  • How to create a bootable floppy?
  • How to create a bootable iso?
  • How to create a bootable usb?


How to Create a Bootable USB: Windows XP and Vista

STEP 0:Your motherboard (BIOS) has to support boot from usb (usb-key or usb-hdd). You don't need to know which of these types your media is though, your BIOS recognizes the usb controller in the device, and this determines usb-key or usb-hdd type.
In case your motherboard does not support booting from usb, the PLoP Boot Manager might be a solution.

STEP 1:Download the latest copy of Syslinux and extract it.

STEP 2: Open a command prompt and cd to your 'syslinuxwin32' folder. Run syslinux.exe -m -a X: replacing X with the drive letter of your media. This will install suitable MBR code into your flash drive and mark the partition on it as active.

STEP 3: Copy a Linux kernel image (like vmlinuz) to the root (X:) of your media.

STEP 4: Lastly, create a 'syslinux.cfg' file in the root of your media (X:) and
enter any configuration options you need/want.


You can also use RMPrepUSB to format your UFD and to install SYSLINUX.

How to Create a Bootable USB: For Linux

STEP 0:Your motherboard (BIOS) has to support boot from usb (usb-key or usb-hdd).
You don't need to know which of these types your media is though, your BIOS recognizes
the usb controller in the device, and this determines usb-key or usb-hdd type.

STEP 1:Download the latest copy of Syslinux and extract it.

STEP 2: Open a command prompt and cd to your 'syslinux/linux' folder. Run ./syslinux -i /dev/sdX1
replacing X with the device node of your media.

STEP 3:Ensure the usb drive is bootable. For that, we need a working MBR code and an active partition.
Open a command prompt and cd to your 'syslinux/mbr' folder. Run the following two commands,
replacing X with the device node of your usb drive:

This will write the Syslinux mbr code (mbr.bin) into the master boot record of the drive,
and mark first partition as active (bootable). For the second task, you can use fdisk or other
disk partitioning tools.

STEP 4: Copy a Linux kernel image (like vmlinuz) to the root (/dev/sdX1) of your media.

STEP 5: Lastly, create a 'syslinux.cfg' file in the root of your media (/dev/sdX1) and
enter any configuration options you need/want.

Creating bootable images

  • Creating DOS floppy images.
  • Creating Large floppy images.
  • Creating Hard disk images.
  • Disk image for FreeBSD 'bootonly' install ISO.
  • How to boot into these images? See MEMDISK for instructions.
  • Accessing MEMDISK arguments from DOS.

Booting

  • How to boot an Iso image?

No native BIOS support

Linux

Install Linux On Usb Stick

  • Possible to boot from CD if there is no native CD support in bios?
  • Possible to boot from USB if there is no native USB support in bios?

Software To Install Linux From Usb

Retrieved from 'https://wiki.syslinux.org/wiki/index.php?title=HowTos&oldid=4381'